Ten 80/12 Universal needles for replacing the same size in a 130/705 H home machine.
Five 80/12 Jersey Ball Point needles with the 130/705 H SUK code shown on the pack.
Five size 75/11 needles with the Stretch eye and scarf for elastic materials.
A five-needle Leather assortment for checking sizes and stitch holes on a leather offcut.
Three Universal Twin assemblies for comparing needle spacing and nominal sizes on compatible setups.
Five 80/12 EL×705 needles for machines whose manuals specify the listed overlock system.
A single Wing needle in 100/16 for testing a decorative hemstitch on a supported machine.
One Stretch Twin assembly with 2.5 mm spacing and size 75 for a compatible knit hem setup.
Ten EL×705 SUK ball-point needles in 75/11 for machines that specify this system.
Five 100/16 Leather needles for repeating a tested cutting-point setup in compatible leather work.
One 120/19 winged needle for a decorative opening on a setup that supports the larger size.
Ten Universal 90/14 needles for keeping replacements of the same size at the sewing station.
One size 75 Stretch Twin assembly with 4.0 mm spacing for supported knit hems.
Five 705 HDK needles in 90/14 with a threading slot at the eye.
One Universal Twin assembly combining 3.0 mm spacing with size 90.
One Universal Twin with 2.5 mm spacing and size 80 for compatible parallel stitching.
One size 80 Universal Twin assembly with a narrow 2.0 mm gap between points.
Ten light ball-point 90/14 needles in the EL×705 SES variant for compatible overlock setups.
Ten chrome-plated Universal needles in 90/14 for a supported general sewing setup.
Ten five-needle cards for stocking one EL×705 serger size across repeat work.
Ten Universal needles in mixed sizes for testing several fabric and thread combinations.
One Universal Twin assembly in size 100 with 6.0 mm spacing for a compatible wide setup.
A Janome HAx1 SP serger set with two size 11 and three size 14 needles.
Five 90/14 Stretch needles for an elastic project whose thread and layers suit the larger size.
Five Jersey Ball Point needles in 100/16 for a knit setup that calls for that nominal size.
Ten 70/10 Universal needles for replacing the same fine size on repeat work.
Five 110/18 Leather needles for a machine and thread setup that supports that size.
Five 90/14 Leather needles for a supported cutting-point setup at a smaller nominal size.
One 8.0 mm Universal Twin assembly in size 100 for a machine that expressly allows this width.
One Universal Twin in size 90 with 4.0 mm spacing for compatible parallel seams.
Five EL×705 needles in a mixed-size card for a home serger that specifies that system.
Five Special Super Stretch needles marked HAx1 SP and 90/14 for compatible stretch work.
Five Universal needles in 75/11 for a general sewing setup that suits that size.
Five Jersey Ball Point needles in 90/14 for a compatible knit setup.
Five Double Eye needles for testing two thread colors through one needle on a supported setup.
One Jeans Twin assembly with 4.0 mm spacing and size 100 for a compatible denim stitch setup.
Five 70/10 Jersey Ball Point needles for a knit and thread combination that suits the fine size.
One Universal Twin in size 70 with 1.6 mm between the points for close parallel rows.
Ten size 60/8 Universal needles for repeating a fine sewing setup that suits this size.
A Super Stretch HAx1 SP pack containing two 75/11 and three 90/14 needles.
Ten Universal needles in size 100/16 for a tested general sewing setup.
One Universal Twin assembly in size 80 with 4.0 mm between the two points.
One assembly combining a Wing and a Universal needle for two different decorative rows.
Five SINGER Universal needles in size 70/10 for lightweight woven fabric.
A five-needle SINGER Leather assortment for testing two sizes on leather offcuts.
Three ten-needle envelopes in distinct EL×705 SUK sizes for a compatible serger or coverstitch machine.
A two-width Stretch Twin kit with a pocket guide for comparing supported knit hem spacing.
